 | Epoxy Encapsulation and Brass Housing Protects Sensitive
Circuitry From Vibration, Moisture, and Corrosion |
| No moving parts to wear out. |
| Uses a fast Reacting, Time-Proven Thermistor Sensor |
| Simple to Wire, Connects in Series with Load |
| 1/4 NPTF Threaded Enclosure With Sealed Packard Connector
Fits Many Engine Applications |
| Available with Custom Specifications Such as Temperature
Setpoints, Hysteresis, and Packaging |
| Solid-State Electronic Design Lasts Longer than
Mechanical Switches |
| Ruggedized Packaging Stands Up to Tough Environments |
| Buy Only What You Need Through Custom Makeup
Program APPLICATIONS
|
| Sensing Turbocharger Air Temperature |
| Controlling Fan Operation |
| Monitoring Generator Set Temperatures |
| Controlling Engine Temperatures OPERATION
Switch is normally closed at temperatures below setpoint causing
the load to remain energized. When setpoint temperature is reached, switch opens and load
is turned off. Temperature must then fall below setpoint minus hysteresis value before
switch will close and the load becomes energized again.
SPECIFICATIONS
Supply Voltage: 7-30 VDC
Reverse Voltage Protection: Standard
Load Current Rating: 1.25 Amps
Control Type: On/Off with Selected Hysteresis
Response Time: 10 Seconds 63% Step Function Change
Packaging: 1/4 NPTF Brass Housing w/Wire Terminals &
Sealed Connectors
Storage Temperature Range: -40 Degrees to 80 Degrees C
Operation Temperature Range: -40 Degrees to 75 Degrees C
Humidity: to 100%
For Application
Assistance, Quotation, Product Specifications,
or Custom Design Call 1-800-541-4056
Home | Up | Products
Copyright © 1999-2005 RBE Electronics, Inc. - All Rights Reserved. |
|
|
