CS 880 - DC Current Sensor

CS 880- DC Current Sensing Module

Reliable

	Hall Effect Current Sensing
	Designed for Hostile Environments and Temperature Extremes
	Encapsulated Circuitry Protects Against Moisture and Shock
	Solid-State Short Circuit Protected Output
	500 mA Source Output

Versatile

	Adjustable Current Set-Point, Up to 200 Amps
	Zero Voltage Drop
	Operates on a Wide Power Supply Range
	Available with 0 to 5 V Linear Output Proportional to Current

Economical

	Solid-State Design with State of the Art Components
	Durable Package for Long Product Life

cs880.jpg (4361 bytes)

Applications

Charging Current Controls

DC Motor Current Protection

DC Welding Controls

High Current DC Circuit Breaker

Etching Baths

Electric Vehicles such as Golf Carts

Electro Plating

DC Generator Sets

Monitors Battery Charging

Senses Current Overload and Underload

Operation

The CS 880 Series senses DC current flow in a wire brought through the 1.10 inch diameter hole located in the center of the module. Current sensing is done by an internal Hall Effect device. When the forward current flow goes above the pre-adjusted set point, the output goes high. When the forward current falls below the pre-adjusted set-point, the output goes low. A reverse current flow has no effect. The current sense set point may be between 0-10, 0-100 or 0-200 Amp depending on model selected.

Specifications

Supply Voltage: 9.6 - 28.8 VDC

Supply Transient Protection: Plus 700 V 8 mS - Minus 1000 V 8 mS

Output Transient Protection: 24 V at 5 Joules

Output: 500 mA Source - Short Circuit Protected

Operating Temperature: 0° to 80° C

Storage Temperature: -55° to 85° C

Humidity: 100% Condensing

Switch Set Point

CS 880 - 010	0-10 Amp Factory Set to 3.0 +/- 10 %
CS 880 - 100	0-100 Amp Factory Set to 30 +/- 10 %
CS 880 - 200	0-200 Amp Factory Set to 60 +/- 10 %