Reliable |
 | Dependable Solid-State Design |
| Reverse Voltage Protected (DC Model) |
|
Economical |
| Low Cost, Solid-State Design with State of the Art Components |
|
Applications |
The RE 1040 series RPM Sensing Modules are used in
a wide variety of industrial, agricultural and transportation applications. Some of these
include:
Over/Under Speed Detection - Speed Conditioning for Computer Input
- Engine Starter Disconnect Frequency to Voltage Convertor - Tachometer - Monitor Engine
Speed |
Operation
RE 1041 (DC Model)
RE 1043 (AC Model)
The RE 1041 and RE 1043 have an adjustable frequency trip point
which is selected by a remote, discrete resistor or potentiometer. Below frequency trip
point it is off. Input signals from magnetic pickups and Hall effect switches are
compatible with these modules.
Specifications |
| Freq. Trip Hystersis Typ. |
5% Max. Range |
| Output Current |
500 MA Continuous/3 Amp. Peak |
| Load Dump (RE 1041/42) |
60V/sec. |
| Operating Voltage (RE 1042/43) |
(12-24)VDC |
| Operating Voltage (RE 1043) |
115 VAC |
| Temp. Freq. Variation |
2% Max. Range |
| Maximum Frequency |
15 kHz |
| Minimum Frequency |
50 Hz or 10% of Max. Freq. |
| Output Voltage Ripple |
1% of Full Scale Volt |
| External Noise Rejection |
80 dB |
| Output De-energizers (RE
1041/43) |
At RPM Trip Point |
| Linear Output Voltage Range (RE
1042) |
.5-5 VDC |
| Humidity Resistance |
95% Relative Max. |
| Freq. Trip Point (RE 1041/42) |
Adjusted by Ext. Resistor or Pot. |
| Dimensions (RE 1041/42) |
1.39 x 1.50 x 2.20h |
| Dimensions (RE 1043) |
1.56 x 1.97 x 2.69h |
For Application Assistance, Quotation,
Product Specifications, or Custom Design Call 1-800-541-4056
Home | Up | Products
Copyright © 1999-2005 RBE Electronics, Inc. - All Rights Reserved. |
|
